Electrical > Electrical Tools > Extech Instruments Non Contact Phase Sequence Tester Model PRT200

Extech Instruments Non Contact Phase Sequence Tester Model PRT200

This Extech Instruments Non-Contact Phase Sequence Tester uses a non-contact voltage-testing method that permits easy connection to insulated conductors, avoiding uncertain and difficult connections to bare high voltage wires. Battery Included: Yes, Dimensions L x W x H (in.): 5 x 3 x 2, Display Type: LED, Frequency: 45-65Hz, Volts: 75-1,000 AC. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement Adjustable LED brightness switch for making measurements in dimly lit areas or sunlight Fully insulated alligator clips with wide jaws Low battery warning

LEDs indicate phase orientation (clockwise or counter-clockwise) and whether. All rights reserved including the right of reproduction in whole or in part in any form. The tester has a 45 to 65Hz frequency range, features adjustable Hi Lo LED brightness switch for making measurements in dimly lit areas or sun.

2 UNI-T UT262C non-contact 3 Phase Sequence Rotation Indicator Tester CAT III 600V -UNI-T UT262C. Tests up to 1000VAC with LED and. 75 to 1000VAC input voltage with 45 to 65Hz frequency range. Cable for Pipes, Model# 2314-21. The non-contact voltage detecting technique. Milwaukee M-Spector 360 Digital Inspection Camera Kit With 9-Ft. 5 Non Contact ETCR1000A 3 Phase Rotation Tester Indicator Detector -Non Contact. Extech Instruments is a manufacturer and supplier of 15 major product categories of technically advanced, portable meters including multimeters, clamp meters, electrical testers, and environmental meters for the measurement of light, sound, temperature, humidity, airflow, RPMs, and water quality. Phase Rotation Testers. Non-Contact Phase Sequence Tester. The Extech by FLIR noncontact tester checks phase sequence and status on 3-phase power sources.

Extech PRT200: Non-Contact Phase Sequence Tester. Non-Contact Phase Sequence Tester Category: Electrical Test Instruments Phase Motor Rotation Testers Price: $0 Brands: Extech Product. PRT200 Non-Contact Phase Sequence Tester.

Specifications prt200: Brand: Extech, Type: Non-Contact, Title: Sequence, Upc: 01, Payments meteinstrumen: PayPal, Offer meteinstrumen: Best offer: false, Prt200 price: $119.

Extech Instruments Non Contact Phase Sequence Tester Model PRT200

  • Price: 199.99
  • Manufacturer: Extech
  • SKU: PRT200
  • Category: Electrical Tools

Congratulations on your purchase of this Meter. PRT200 is a Non-Contact Phase Sequence Tester that tests up to 1000VAC with LED and audible indication. 99 USD, Sold: 0, Bids: 0, Quantity: 1, Min. Introduction Congratulations on your purchase of this Meter. The PRT200 is a non-contact phase sequence tester that tests up to 1000 VAC with visual audible indication. Essential LEDs indicate orientation (CW or CCW) and whether each phase is live. LED s indicate phase orientation (clockwise or counter-clockwise) and if each phase is live. The non-contact voltage detecting technique permits easy. Checks phase sequence and phase status up to 1000 VAC with LED and audible indication. PRT200 Non Contact Phase Sequence Tester Key Features. Battery warningComplete three built-in 30" test leads large color-coded clips, four AA batteries, pouch case. PRT200 Non Contact Phase Sequence Tester. Phase Sequence Tester has a 40 to 600V rated range for testing phase orientation of 3-phase power sources over a 15 to 400Hz frequency range.

Tests up to 1000VAC with visual audible indication. The PRT200 is used to quickly and accurately determine three phase sequence for motor installation and repair. MA410T - 400A AC True RMS Clamp Meter + NCV - : 0:51 Instruments 1 345. PRT200 Non Contact Phase Sequence Tester PRT200 is a Non-Contact. The non-contact voltage detecting technique permits easy connection to insulated conductors, avoiding uncertain and difficult connections to bare. Model PRT200. Product description. Non-Contact Phase Rotation Tester. The PRT200 Non-Contact Phase Sequence Tester tests up to 1000VAC with visual audible. EBay Product ID (ePID).

PRT200 Offers. What s included with the PRT200. Shop 66 Electrical Tools products at Northern Tool + Equipment. Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed. Beeper sounds intermittently when correct phase is detec. Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement. EXTECH INSTRUMENTS 480400 TESTER, PHASE ROTATION 40-600V, 15-400HZ From the Manufacturer. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase. The alligator clips included with the tester are also fully insulated, ensuring user protection at all times.

This device accurately determines three phase sequence for motor installation and repair. Copyright 2011 Instruments Corporation. Adjustable hi lo LED brightness swi. Checks phase sequence and phase status.

Extech Instruments Wireless Transmitter Model HDV WTX  

Extech Instruments Wireless Transmitter Model HDV WTX

This Extech Instruments Wireless Transmitter allows remote viewing from up to 100 ft. away, allowing you to use your borescope in hard to reach areas while keeping the display at eye level. Probe (in.): 39. On board controls to adjust the brightness of the LEDs on the camera probe Works with Model#s HDV610 and HDV620 (Northern Item#s 23640 and 23641) Uses the same battery and charger as the compatible borescopes Waterproof design Comfortable molded grip for one-hand operation

Details

 
Price
FREE SHIPPING Milwaukee Fluorescent Lighting Tester Model 2210 20  

FREE SHIPPING Milwaukee Fluorescent Lighting Tester Model 2210 20

The Milwaukee??? Fluorescent Lighting Tester tests fluorescent lighting fixtures and cuts troubleshooting time in half. Tester delivers complete lamp, ballast and pin testing. Use it to test lamps before or after installing, and test without dismantling the fixtures. Fluorescent lighting tester will dramatically improve the productivity of professional electricians and maintenance technicians. Instead of a 'replace and hope' strategy, users can test their lighting fixtures faster and easier. Ideal for residential, commercial and industrial applications. Common Usage: Fluorescent fixture. Complete 3-in-1 solution tests lamps, ballast and pins 2.5ft. fully retractable antenna for extended reach when testing Non-conductive antenna sleeve allows for safe testing Removable antenna adapter improves lamp test response Visual and audible tool feedback to easily confirm testing Built-in LED flashlight illuminates dark work spaces Dial and buttons positioned for one-handed use Rugged overmolding for increased grip and durability Durable tool continues to work after a 6.5-ft. drop 35-hour battery life on 4 AA batteries (included) CE and UL certified

Details

 
Price
JET 230 460V Electric Trolley 5 Ton Capacity 3 Phase Prewired 230V Model 5T ET 3C  

JET 230 460V Electric Trolley 5 Ton Capacity 3 Phase Prewired 230V Model 5T ET 3C

The JET??? 5-Ton, 230/460V Electric Trolley can lift up to a 10,000-lb. load. Mounts to fit 5in. to 7in. I-beam and beam flange widths. Capacity (lbs.): 10,000, Power Source: 230/460, Adjustable: Yes, Includes: Solenoid operated traveling brake, OSHA Approved: Yes, Material Type: Steel, Product Type: Trolley, Phase: Three phase, Travel Speed (ft. per min.): 39 1/3, Finish Type: Powder-coat, Flange Width (in.): 5-7. Designed to give single control convenience Features 230/460V, 3 phase wiring (specify voltage when ordering) Solenoid operated traveling brake Adjustable to fit 5in. min. to 7in. max. I-beam and beam flange widths Must be fitted with a JET 4 station 24V push-button control (sold separately) Durable powder-coat finish Lug mount or hook pin Electronic trolley not supplied with a 4-button controller 28in.L x 19 1/2in.W x 16in.H

Details

 
Price
FREE SHIPPING Quincy Duplex Air Compressor 7 5 HP 230 Volt 1 Phase 120 Gallon Horizontal Model 271CC12DC  

FREE SHIPPING Quincy Duplex Air Compressor 7 5 HP 230 Volt 1 Phase 120 Gallon Horizontal Model 271CC12DC

Heavy-duty industrial 2-stage duplex air compressor systems protect your business from expensive downtime! The duplex compressor includes two compressors and two motors mounted on an ASME horizontal tank. Each system can be run independently or together, should your air demand require it. Works in applications from intermittent duty to 100% duty requirements. 1-year limited warranty without extended warranty kit purchase. Purchase two extended warranty kits (Item# 42637, one for each compressor) at the same time (on the same receipt) as your Quincy 120-gallon duplex air compressor and register online within 10 days of receipt, and it will double the package warranty to 2 years and triple the pump warranty to 3 years (parts and labor). U.S.A. CFM at 175 PSI: 45.2, CFM at 90 PSI: 10-30, Dimensions L x W x H (in.): 78 x 28 x 55, Drive: Belt, Air Tank Size (gal.): 120, Max. PSI: 175, Motor Phase(s): Single, Pump Life (hrs.): 50,000+, Duty Cycle: 100%, Volts: 230, Stage: 2, Tank Type: Horizontal, HP: 7 1/2 (each), Pump: Cast iron. 7.5 HP motor 230 (240)V, 1 Phase 120-gallon tank Provides up to 175 PSI and delivers 45.2 CFM when both pump/motor systems are operating 50,000-hour pump life Solid-state circuitry control panel with two I.E.C.-rated magnetic starters and auxiliary contacts Thermal overload protection One 120 VAC control transformer Automatic alternation with lead/lag Green LED Power On indicators Compressor Run indicators Test/off/run rocker switches Lead select/auto switch Hour meters Red LED motor fault indicators Fault/shutdown alarm contacts for start/stop operation Single point incoming power connection Comes with oil in the compressor pumps, ready for hookup

Details

 
Price